Home > Quality Control & IS Codes

IS Codes for builder's hardware

Er. Parbhakar Dwivedi
0
 

       

IS Codes for builder's hardware
IS 204 : Specification for tower bolts
IS 204 : (Part 1) : 1991 Ferrous metals (fifth revision)
IS 204 : (Part 2) : 1992 Non-ferrous metals (fifth revision)
IS 205 : 1992 Specification for non-ferrous metal butt hinges (fourth revision)
IS 206 : 2010 Specification for tee and strap hinges (fifth revision)
IS 208 : 1996 Specification for door handles (fifth revision)
IS 281 : 2009 Specification for mild steel sliding door bolts for use with padlocks (fourth revision)
IS 362 : 1991 Specification for parliament hinges (fifth revision)
IS 363 : 1993 Specification for hasps and staples (fourth revision)
IS 364 : 1993 Specification for fanlight catch (third revision)
IS 452 : 1973 Specification for door springs, rat-tail type (second revision)
IS 453 : 1993 Specification for double-acting spring hinges (third revision)
IS 729 : 1979 Specification for drawer locks, cupboard locks and box locks (third revision)
IS 1019 : 1974 Specification for rim latches (second revision)
IS 1341 : 1992 Specification for steel butt hinges (sixth revision)
IS 1823 : 1980 Specification for floor door stoppers (third revision)
IS 1837 : 1966 Specification for fanlight pivots (first revision)
IS 2209 : 1976 Specification for mortice locks (vertical type) (third revision)
IS 2681 : 1993 Specification for nonferrous metal sliding door bolts for use with padlocks (third revision)
IS 3564 : 1995 Specification for door closers (hydraulically regulated) (second revision)
IS 3818 : 1992 Specification for continuous (piano) hinges (third revision)
IS 3828 : 1966 Specification for ventilator chains
IS 3843 : 1995 Specification for steel backflip hinges (first revision)
IS 3847 : 1992 Specification for mortice night latches (second revision)
IS 4621 : 1975 Specification for indicating bolts for use in public baths and lavatories (first revision)
IS 4948 : 2002 Specification for welded steel wire fabric for general use (second revision)
IS 4992 : 1975 Specification for door handles for mortice locks (vertical type) (first revision)
IS 5187 : 1972 Specification for flush bolts (first revision)
IS 5899 : 1970 Specification for bathroom latches
IS 5930 : 1970 Specification for mortice latch (vertical type)
IS 6315 : 1992 Specification for floor springs (hydraulically regulated) for heavy doors (second revision)
IS 6318 : 1971 Specification for plastic window stays and fasteners
IS 6343 : 1982 Specification for door closers (pneumatically regulated) for light door weighing up to 40 kg (first revision)
IS 6607 : 1972 Specification for rebated mortice locks (vertical type)
IS 7196 : 1974 Specification for hold fast
IS 7197 : 1974 Specification for double action floor springs (without oil check) for heavy doors
IS 7534 : 1985 Specification for sliding locking bolts for use with padlocks (first revision)
IS 8756 : 1978 Specification for ball catches for use in wooden almirah
IS 9106 : 1979 Specification for rising butt hinges
IS 9131 : 1979 Specification for rim locks
Is 9460:1980 Specification for flush drop handle for drawer
IS 9899 : 1981 Specification for hat coat and wardrobe hooks
IS 10019 : 1981 Specification for mild steel stays and fasteners
IS 10090 : 1982 Specification for numericals
IS 10342 : 1982 Specification for curtain rail system
IS 12817 : 2013 Specification for stainless steel butt hinges (second revision)
IS 12867 : 1989 Specification for PVC hand rails Covers concealed type (hydraulically regulated)
IS 15833 : 2009 Specification for stainless steel tower bolts
IS 15834 : 2008 Specification for stainless steel sliding door bolts for use with padlocks
IS 16015 : 2013 Specification for mortice locks with lever mechanism (vertical type, sliding door locks and dead locks)
IS 16016 : 2013 Specification for cylindrical locks with pin tumbler mechanism

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close