Home > Quality Control & IS Codes

IS Codes For CEMENT AND CONCRETE (INCLUDING STEEL REINFORCEMENT FOR CONCRETE)

Er. Parbhakar Dwivedi
0
 

       

It is base document outlining policy, procedures and endeavors to meet the requirement by three pronged strategy.

  1. Aggregates
  2. Cement
  3. Supplementary
  4. Cementitious Materials (Mineral Admixtures including Pozzolana)
  5. Chemical Admixtures
  6. Concrete
  7. Cement and Concrete Sampling and Methods of Test
  8. Treatment of Concrete Joints
1. Aggregates
IS 383 : 2016 Specification for coarse and fine aggregates for concrete (third revision)
IS 650 : 1991 Specification for standard sand for testing of cement (second revision)
IS 1542 : 1992 Specification for sand for plaster (second revision)
IS 2116 : 1980 Specification for sand for masonry mortars (first revision)
IS 2386 : Methods of test for aggregates for concrete
IS 2386 : (Part 1) : 1963 Particle size and shape
IS 2386 : (Part 2) : 1963 Estimation of deleterious materials and organic impurities
IS 2386 : (Part 3) : 1963 Specific gravity, density, voids, absorption and bulking
IS 2386 : (Part 4) : 1963 Mechanical properties
IS 2386 : (Part 5) : 1963 Soundness
IS 2386 : (Part 6) : 1963 Measuring mortar making properties of fine aggregates
IS 2386 : (Part 7) : 1963 Alkali aggregate reactivity
IS 2386 : (Part 8) : 1963 Petrographic examination
IS 2430 : 1986 Methods of sampling of aggregates of concrete (first revision)
IS 6579 : 1981 Specification for coarse aggregate for water bound macadam (first revision)
IS 9142 : 1979 Specification for artificial light-weight aggregates for concrete masonry units
2. Cement
IS 269 : 2015 Specification for ordinary Portland cement (sixth revision)
IS 455 : 2015 Specification for Portland slag cement (fifth revision)
IS 1489 : Specification for Portland Pozzolana cement
IS 1489 : (Part 1) : 2015 Fly ash based (fourth revision)
IS 1489 : (Part 2) : 2015 Calcined clay based (fourth revision)
IS 1489 : IS 3466 : 1988 Specification for masonry cement (second revision)
IS 6452 : 1989 Specification for high alumina cement for structural use (first revision)
IS 6909 : 1990 Specification for super sulphate cement (first revision)
IS 8041 : 1990 Specification for rapid hardening Portland cement (second revision)
IS 8042 : 2015 Specification for white Portland cement (third revision)
IS 8043 : 1991 Specification for hydrophobic Portland cement (second revision)
IS 12330 : 1988 Specification for sulphate resisting Portland cement
IS 12600 : 1989 Specification for low heat Portland Cement
IS 16415 : 2015 Specification for composite cement
3. Supplementary Cementitious Materials (Mineral Admixtures including Pozzolana)

IS 1344 : 1981 Specification for calcined clay Pozzolana (second revision)
IS 1727 : 1967 Methods of test for pozzolanic materials (first revision)
IS 3812 : Specification for pulverized fuel ash
IS 3812 : (Part 1) : 2013 For use as pozzolana in cement, cement mortar and concrete (third revision)
IS 3812 : (Part 2) : 2013 For use as admixture in cement mortar and concrete (third revision)
IS 6491 : 1972 Method of sampling of fly ash
IS 12089 : 1987 Specification for granulated slag for manufacture of Portland slag cement
IS 12870 : 1989 Methods of sampling calcined clay pozzolana
IS 15388 : 2003 Specification for silica fume
IS 16354 : 2015 Specification for metakaolin for use in cement, cement mortar and concrete
4. Chemical Admixtures
IS 6925 : 1973 Methods of test for determination of water soluble chlorides in concrete admixtures
IS 9103 : 1999 Specification for admixtures for concrete (first revision)
5. Concrete
IS 456 : 2000 Code of Practice for plain and reinforced concrete (fourth revision)
IS 1343 : 2012 Code of Practice for prestressed concrete (second revision)
IS 4926 : 2003 Code of Practice for ready-mixed concrete (second revision)
6. Cement and Concrete Sampling and Methods of Test
IS 516 : 1959 Methods of test for strength of concrete
IS 1199 : 1959 Methods of sampling and analysis of concrete
IS 2770 (Part 1) : 1967 Methods of testing bond in reinforced concrete: Pullout test
IS 3085 : 1965 Methods of test for permeability of cement mortar and concrete
IS 3535 : 1986 Methods of sampling hydraulic cement (first revision)
IS 4031 : Methods of physical tests for hydraulic cement
IS 4031 : (Part 1) : 1996 Determination of fineness by dry sieving (second revision)
IS 4031 : (Part 2) : 1999 Determination of fineness by specific surface by Blaine air permeability method (second revision)
IS 4031 : (Part 3) : 1988 Determination of soundness (first revision)
IS 4031 : (Part 4) : 1988 Determination of consistency of standard cement paste (first revision)
IS 4031 : (Part 5) : 1988 Determination of initial and final setting times (first revision)
IS 4031 : (Part 6) : 1988 Determination of compressive strength of hydraulic cement (other than masonry cement)(first revision)
IS 4031 : (Part 7) : 1988 Determination of compressive strength of masonry cement (first revision)
IS 4031 : (Part 8) : 1988 Determination of transverse and compressive strength of plastic mortar using prism (first revision)
IS 4031 : (Part 9) : 1988 Determination of heat of hydration (first revision)
IS 4031 : (Part 10) : 1988 Determination of drying shrinkage (first revision)
IS 4031 : (Part 11) : 1988 Determination of density (first revision)
IS 4031 : (Part 12) : 1988 Determination of air content of hydraulic cement mortar (first revision)
IS 4031 : (Part 13) : 1988 Measurement of water retentivity of masonry cement (first revision)
IS 4031 : (Part 14) : 1989 Determination of false set
IS 4031 : (Part 15) : 1991 Determination of fineness by wet sieving
IS 4032 : 1985 Methods of chemical analysis for hydraulic cement (first revision)
IS 5816 : 1999 Method of test for splitting tensile strength of concrete (first revision)
IS 8142 : 1976 Methods of test for determining setting time of concrete by penetration resistance
IS 9013 : 1978 Method of making, curing and determining compressive strength of accelerated cured concrete test specimens
IS 9284 : 1979 Method of test for abrasion resistance of concrete
IS 12423 : 1988 Methods for colorimetric analysis of hydraulic cement
IS 12803 : 1989 Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer
IS 12813 : 1989 Method of analysis of hydraulic cement by atomic absorption spectrophotometer
IS 13311 : (Part 1) : 1992 Methods of non-destructive testing of concrete Ultrasonic pulse velocity
IS 13311 : (Part 2) : 1992 Rebound hammer
IS 14959 : Method of test for determination of water soluble and acid soluble chlorides in mortar and concrete
IS 14959 : (Part 1) : 2001 Fresh mortar
IS 14959 : (Part 2) : 2001 Hardened mortar and concrete
7. Treatment of Concrete Joints
IS 432 : Specification for mild steel and medium tensile steel bars and hard drawn steel wire for concrete reinforcement
IS 432 : (Part 1) : 1982 Mild steel and medium tensile steel bars (third revision)
IS 432 : (Part 2) : 1982 Hard drawn steel wire (third revision)
IS 1566 : 1982 Specification for hard drawn steel wire fabric for concrete reinforcement (second revision)
IS 1608 : 2005 Metallic materials. Tensile testing at ambient temperature (third revision)
IS 1785 : Specification for plain hard drawn steel wire for pre-stressed concrete
IS 1785 : (Part 1) : 1983 Cold drawn stress-relieved wire (second revision)
IS 1785 : (Part 2) : 1983 As drawn wire (first revision)
IS 1786 : 2008 Specification for high strength deformed steel bars and wires for concrete reinforcement (fourth revision)
IS 1834 : 1984 Specification for hot applied sealing compound for joint in concrete (first revision)
IS 1838 : Specification for preformed fillers for expansion joint in concrete pavements and structures (non extruding and resilient type)
IS 1838 : (Part 1) : 1983 Bitumen impregnated fibre (first revision)
IS 1838 : (Part 2) : 1984 CNSL aldehyde resin and coconut pith
IS 1838 : (Part 3) : 2011 Polymer based
IS 2090 : 1983 Specification for high tensile steel bars used in Prestressed concrete (first revision)
IS 6003 : 2010 Specification for indented wire for prestressed concrete (second revision)
IS 6006 : 2014 Specification for uncoated stress- relieved strand for prestressed concrete (second revision)
IS 10790 : Methods of sampling of steel for prestressed and reinforced concrete
IS 10790 : (Part 1) : 1984 Prestressing steel
IS 10790 : (Part 2) : 1984 Reinforcing steel
IS 10566 : 1983 Methods of test for preformed fillers for expansion joints in concrete paving and structural construction
IS 11433 : Specification for one grade polysulphide based joint sealant
IS 11433 : (Part 1) : 1985 General requirements
IS 11433 : (Part 2) : 1986 Methods of test
IS 12118 : Specification for two parts polysulphide based sealants
IS 12118 : (Part 1) : 1987 General requirements
IS 12118 : (Part 2) : 1987 Methods of test Concrete
IS 13620 : 1993 Specification for fusion bonded epoxy coated reinforcing bars
IS 14268 : 1995 Specification for uncoated stress relieved low relaxation seven ply strand for prestressed concrete
IS 16172 : 2014 Specification for reinforcement couplers for mechanical splices of bars in concrete

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close