Home > Quality Control & IS Codes

IS Codes For DOORS, WINDOWS AND VENTILATORS

Er. Parbhakar Dwivedi
0
 

       

It is base document outlining policy, procedures and endeavors to meet the requirement by three pronged strategy.

  1. Wooden Doors, Windows and Ventilators
  2. Metal Doors, Windows and Ventilators
  3. Plastic Doors and Windows
  4. Concrete Door and Window Frames
  5. Other Composite Material Doors and Windows
  6. Fire Check Doors
  7. Mesh/Net for Mosquito/Vector Prevention
1. Wooden Doors, Windows and Ventilators
IS 1003 : Specification for timber paneled and glazed shutters
IS 1003 : (Part 1) : 2003 Door shutters (fourth revision)
IS 1003 : (Part 2) : 1994 Window and ventilator shutters (third revision)
IS 2191 : Specification for wooden flush door shutters (cellular and hollow core type)
IS 2191 : (Part 1) : 1983 Plywood face panels (fourth revision)
IS 2191 : (Part 2) : 1983 Particle board face panels and hardboard face panels (third revision)
IS 2202 Specification for wooden flush door shutters (solid core type)
(Part 1) : 1999 Plywood face panels (sixth revision)
(Part 2) : 1983 Particle board face panels and hardboard face panels (third revision)
IS 4020 : Method of tests for door shutters
IS 4020 : (Part 1) : 1998 General (third revision)
IS 4020 : (Part 2) : 1998 Measurement of dimensions and squareness (third revision)
IS 4020 : (Part 3) : 1998 Measurement of general flatness (third revision)
IS 4020 : (Part 4) : 1998 Local planeness test (third revision)
IS 4020 : (Part 5) : 1998 Impact indentation test (third revision)
IS 4020 : (Part 6) : 1998 Flexure test (third revision)
IS 4020 : (Part 7) : 1998 Edge loading test (third revision)
IS 4020 : (Part 8) : 1998 Shock resistance test (third revision)
IS 4020 : (Part 9) : 1998 Buckling resistance test (third revision)
IS 4020 : (Part 10) : 1998 Slamming test (third revision)
IS 4020 : (Part 11) : 1998 Misuse test (third revision)
IS 4020 : (Part 12) : 1998 Varying humidity test (third revision)
IS 4020 : (Part 13) : 1998 End immersion test (third revision)
IS 4020 : (Part 14) : 1998 Knife test (third revision)
IS 4020 : (Part 15) : 1998 Glue adhesion test (third revision)
IS 4020 : (Part 16) : 1998 Screw withdrawal resistance test (third revision)
IS 4021 : 1995 Specification for timber door, window and ventilator frames
IS 6198 : 1992 Specification for ledged, braced and battened timber shutters (second revision)
2.Metal Doors, Windows and Ventilators
IS 1038 : 1983 Specification for steel doors, windows and ventilators (third revision)
IS 1038 : 1983 Specification for steel windows for industrial buildings (first revision)
IS 1948 : 1961 Specification for aluminium doors, windows and ventilators
IS 1949 : 1961 Specification for aluminium windows for industrial buildings
IS 4351 : 2003 Specification for steel door frames (second revision)
IS 6248 : 1979 Specification for metal rolling shutters and rolling grills (first revision)
IS 7452 : 1990 Specification for hot rolled steel sections for doors, windows and ventilators (second revision)
IS 10451 : 1983 Specification for steel sliding shutters (top hung type)
IS 10521 : 1983 Specification for collapsible gates
3. Plastic Doors and Windows
IS 14856 : 2000 Specification for glass fibre reinforced (GRP) panel type door shutters for internal use
IS 15380 : 2003 Specification for moulded raised high density fibre (HDF) panel doors
IS 15931 : 2012 Specification for solid panel foam UPVC door shutters
4. Concrete Door and Window Frames
IS 6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
5. Other Composite Material Doors and Windows
IS 16073 : 2013 Specification for bamboo-jute composite panel door shutter
IS 16074 : 2014 Specification for steel flush door shutters
IS 16096 : 2013 Specification for phenol bonded bamboo-jute composite hollow door shutter
6. Fire Check Doors
IS 3614 : Specification for fire-check doors
IS 3614 : (Part 1 ) : 1966 Plate, metal covered and rolling type
IS 3614 : (Part 2) : 1992 Metallic and non-metallic fire check doors. Resistance test and performance criteria
7. Mesh/Net for Mosquito/Vector Prevention
IS 1568 : 1970 Specification for wire cloth for general purposes (first revision)
IS 3150 : 1982 Specification for hexagonal wire netting for general purposes (second revision)
IS 11199 : 1985 Specification for HDPE mono- filament twine door nets

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close