Home > Quality Control & IS Codes

IS Codes For Electrical and Allied Installations

Er. Parbhakar Dwivedi
0
 

       

IS Codes For Electrical and Allied Installations
IS 374 : 1979 Electric ceiling type fans and regulators (third revision)
IS 418 : 2004 Tungsten filament lamps for domestic and similar general lighting purposes (fourth revision)
IS 694 : 2010 Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 V (fourth revision)
IS 732 : 1989 Code of practice for electrical wiring installations (third revision)
IS 1180 (Part 1) : 2014 Specification for outdoor type oil immersed distribution transformers up to and including 2 500 kVA, 33kV: Part 1 Mineral oil immersed (fourth revision)
IS 1255 : 1983 Code of practice for installation and maintenance of power cables (up to and including 33 kV rating) (second revision)
IS 1258 : 2005 Bayonet lamp holders (fourth revision)
IS 1569 : 1976 Capacitors for use in tubular fluorescent high pressure mercury and low pressure sodium vapour discharge lamp circuit (first revision)
IS 1646 : 2015 Code of practice for fire safety of buildings (general): Electrical installations (third revision)
IS 1885 : Electro technical vocabulary
IS 1885 : (Part 16/Sec 3) : 1967 Lighting, Section 3 Lamps and auxiliary apparatus
IS 1885 : (Part 17) : 1979 Switchgear and control gear (first revision)
IS 1885 : (Part 32) : 1993 Electrical cables (first revision)
IS 1885 : (Part 78) : 1993 Generation, transmission and distribution of electricity — General
IS 2026 : Power transformers
IS 2026 : (Part 1) : 2011 General (second revision)
IS 2026 : (Part 10) : 2009 IEC 60076-10 : 2001 Determination of sound levels
IS 2026 : (Part 2) : 2010 Temperature-rise (first revision)
IS 2026 : (Part 3) : 2009 IEC 60076-3 : 2000 Insulation levels, dielectric tests and external clearances in air (third revision)
IS 2026 : (Part 4) : 1977 Terminal marking, tapings and connections (first revision)
IS 2026 : (Part 5) : 2011 Ability to withstand short circuit (first revision)
IS 2026 : (Part 7) : 2009 IEC 60076-7 : 2005 Loading guide for oil immersed power transformers
IS 2026 : (Part 8) : 2009 IEC 60076-8 : 1997 Applications guide
IS 2086 : 1993 Specification for carriers and bases used in rewirable type electric fuses for voltages up to 650 V (third revision)
IS 2206(Part 1) : 1984 Flameproof electric lighting fittings: Part 1 Well glass and bulkhead types (first revision)
IS 2215 : 2006 Specification for starters for fluorescent lamps (third revision)
IS 2418 : Specification for tubular fluorescent lamps for general lighting service
IS 2418 : (Part 1) : 1977 Requirements and tests (first revision)
IS 2418 : (Part 2) : 1977 Standard lamp data sheets (first revision)
IS 2418 : (Part 3) : 1977 Dimensions of G-5 and G-13 bi-pin caps (first revision)
IS 2418 : (Part 4) : 1977 Go and no-go gauges for G-5 and G-13 bi-pin caps (first revision)
IS 2672 : 1966 Code of practice for library lighting
IS 3043 : 1987 Code of practice for earthing
IS 3323 : 1980 Bi-pin lamp holders for tubular fluorescent lamps (first revision)
IS 3324 : 1982 Holders for starters for tubular fluorescent lamps (first revision)
IS 3419 : 1989 Fittings for rigid nonmetallic conduits (second revision)
IS 3419 : 1989 Fittings for rigid nonmetallic conduits (second revision)
IS 3480 : 1966 Specification for flexible steel conduits for electrical wiring
IS 3528 : 1966 Specification for waterproof electric lighting fittings
IS 3553 : 1966 Specification for watertight electric lighting fittings
IS 3837 : 1976 Accessories for rigid steel conduits for electrical wiring (first revision)
IS 3837 : 1976 Accessories for rigid steel conduits for electrical wiring (first revision)
IS 3961 : Recommended current ratings for cables
IS 3961 : (Part 1) : 1967 Paper insulated lead sheathed cables
IS 3961 : (Part 2) : 1967 PVC insulated and PVC sheathed heavy duty cables
IS 3961 : (Part 3) : 1968 Rubber insulated cables
IS 3961 : (Part 5) : 1968 PVC insulated light duty Cables
IS 3961 : (Part 6) : 2016 Cross-linked polyethylene insulated PVC sheathed cables
IS 4347 : 1967 Code of practice for hospital lighting
IS 4648 : 1968 Guide for electrical layout in residential buildings
IS 5077 : 1969 Specification for decorative lighting outfits
IS 5216 : Recommendations on safety procedures and practices in electrical work
IS 5216 : (Part 1) : 1982 General (first revision)
IS 5216 : (Part 2) : 1982 Life saving techniques (first revision)
IS 5578 : 1984 Guide for marking of insulated conductors (first revision)
IS 6665 : 1972 Code of practice for industrial lighting
IS 7752 (Part 1) : 1975 Guide for improvement of power factor in consumer installation: Part 1 Low and medium supply voltages
IS 8030 : 1976 Specification for luminaires for hospitals
IS 8084 : 1976 Specification for interconnecting bus-bars for a.c. voltage above 1 kV up to and including 36 kV
IS 8270 (Part 1) : 1976 Guide for preparation of diagrams, charts and tables for electro technology: Part 1 Definitions and classification
IS 8437 (Part 1) : 1993 IEC Pub 479-l (1984) Guide on effects of current passing through the human body: Part 1 General aspects (first revision)
IS 8530 : 1977 Specification for maximum demand indicators, class 1
IS 8623 (Part 1) : 1993 Low-voltage switchgear and control gear assemblies: Part 1 Requirements for type-tested and partially type-tested assemblies
IS 8623(Part 2) : 1993 Specification for low voltage switchgear and control gear assemblies: Part 2 Particular requirements for bus bar trunking systems (bus ways) (first revision)
IS 900 : 1992 Code of practice for installation and maintenance of induction motors (second revision)
IS 9537 : Conduits for electrical installations
IS 9537 : Conduits for electrical installations
IS 9537 : Conduits for electrical installations
IS 9537 : (Part 1) : 1980 General requirements
IS 9537 : (Part 1) : 1980 General requirements
IS 9537 : (Part 1) : 1980 General requirements
IS 9537 : (Part 2) : 1981 Rigid steel conduits
IS 9537 : (Part 2) : 1981 Rigid steel conduits
IS 9537 : (Part 3) : 1981 Rigid plain conduits of insulating materials
IS 9537 : (Part 3) : 1983 Rigid plain conduits of insulating materials
IS 9900 : Specification for high pressure mercury vapour lamps
IS 9900 : (Part 1) : 1981 Requirements and tests
IS 9900 : (Part 2) : 1981 Standard lamp data sheets
IS 9900 : (Part 3) : 1981 Dimensions of lamp caps
IS 9900 : (Part 4) : 1981 Go and no-go gauges of lamp caps
IS 10028 (Part 2) : 1981 Code of practice for selection, installation and maintenance of transformers: Part 2 Installation
IS 10118 (Part 2) : 1982 Code of practice for selection, installation and maintenance of switchgear and control gear: Part 2 Selection
IS 10118 (Part 3) : 1982 Code of practice for selection, installation and maintenance of switchgear and control gear: Part 3 Installation
IS 10322 (Part 5/ Sec 5) : 2013 Luminaires: Part 5 Particular requirements, Section 5 Flood lights (first revision)
IS 11171 : 1985 Dry-type power transformers
IS 11353 : 1985 Guide for uniform system of marking and identification of conductors and apparatus terminals
IS 11353 : 1985 Guide for uniform system of marking and identification of conductors and apparatus terminals
IS 12032 : Graphical symbols for diagrams in the field of electro technology
IS 12032 : (Part 6) : 1987 Protection and conversion of electrical energy
IS 12032 : (Part 7) : 1987 Switchgear, control gear and protective devices
IS 12640 (Part 1) : 2016 IEC 61008-1 : 2012 Residual current operated circuit- breakers without integral overcurrent protection for household and similar uses (RCCBs) — Part 1: General rules (second revision)
IS 12640 (Part 2) : 2016 IEC 61009-1 : 2012 Residual current operated circuit- breakers with integral overcurrent protection for household and similar uses (RCBOs) — Part 2: General rules (second revision)
IS 13010 : 2002 Specification for a.c. watt-hour meters, class 0.5, 1 and 2 (first revision)
IS 13021(Part 1) : 1991 Specification for a.c. supplied electronic ballasts for tubular florescent lamps: Part 1 General and safety requirements
IS 13703(Part 1) : 1993 Specification for low voltage fuses for voltages not exceeding 1 000 V a.c. or 1 500 V d.c.: Part 1 General requirements
IS 13779 : 1999 Specification for a.c. static watt-hour meters, class 1 and 2 (first revision)
IS 14372 : 1996 Specification for volt-ampere hour meters for full power factor range
IS 14415 : 1997 Specification for volt-ampere hour meters for restricted power factor range
IS 14614 : 1998 IEC 1543 : 1995 Residual current operated protective devices (RCDs) for household and similar use — Electromagnetic compatibility
IS 14697 : 1999 Specification for a.c. static transformer operated watt-hour and var-hour meters, class 0.2 S and 0.5 S
IS 14768 Conduit fittings for electrical installations
IS 14768 (Part 1) : 2000 General requirements
IS 14768 (Part 2) : 2003 Metal conduit fittings
IS 14768 : Conduit fittings for electrical installations
IS 14768 : (Part 1) : 2000 General requirements
IS 14768 : (Part 2) : 2003 Metal conduit fittings
IS 14772 : 2000 General requirements for enclosures for accessories for household and similar fixed electrical installations
IS 14772 : 2000 General requirements for enclosures for accessories for household and similar fixed electrical installations
IS 14772 : 2000 General requirements for enclosures for accessories for household and similar fixed electrical installations
IS 14927 : Cable trunking and ducting systems for electrical installations
IS 14927 : (Part 1) : 2001 General requirements
IS 14927 : (Part 2) : 2001 Cable trunking and ducting systems intended for mounting on walls or ceiling
IS 14930 : Conduit systems for electrical installations
IS 14930 : (Part 1) : 2001 General requirements
IS 14930 : (Part 2) : 2001 Particular requirements — conduit systems buried underground
IS 15707 : 2006 Code of practice for testing, evaluation, installation and maintenance of a.c. electricity meters
IS 15844 : 2010 Specification for alternating current direct connected static prepayment meters for active energy (Class 1 and 2)
IS 16246 : 2015 Specification of elastomer insulated cables with limited circuit integrity when affected by fire
IS 16444 : 2015 Specification for a.c. static direct connected watt-hour smart meter class 1 and 2
IS 16463 (Part 11) :2016 IEC 61643-11 : 2011 Low-voltage surge protective devices: Part 11 Surge protective devices connected to low-voltage power systems — Requirements and test methods
IS/IEC 60079-1 : 2007 Explosive atmospheres — Part 1 : Equipment protection by flameproof enclosures “d”
lS/lEC 60309-1 : 2002 Plugs, socket-outlets and couplers for industrial purposes — Part 1: General requirements (first revision)
lS/lEC 60309-2 : 2002 Plugs, socket-outlets and couplers for industrial purposes — Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories (first revision)
IS/IEC 60470 : 2000 High-voltage switchgear alternating current contactors and contactor-based motor starters
IS/lEC 60529 : 2001 Degrees of protection provided by enclosures (IP code)
IS/IEC 60898-1 : 2002 Electrical accessories — Circuit breakers for over current protection for household and similar installations — Part 1: Circuit breakers for a.c. operation
IS/IEC 60947-1 : 2007 Low-voltage switchgear and control gear — Part 1: General rules (first revision)
IS/IEC 60947-1 : 2007 Low-voltage switchgear and control gear — Part 1: General rules (first revision)
IS/IEC 60947-1 : 2007 Low-voltage switchgear and control gear — Part 1: General rules (first revision)
IS/IEC 60947-2 : 2003 Low-voltage switchgear and control gear — Part 2 : Circuit breakers
IS/IEC 60947-2 : 2003 Low-voltage switchgear and control gear — Part 2: Circuit breakers
IS/IEC 60947-2 : 2003 Low-voltage switchgear and control gear — Part 2: Circuit breakers
IS/IEC 60947-3 : 1999 Low-voltage switchgear and control gear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
IS/IEC 60947-3 : 1999 Low-voltage switchgear and control gear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
IS/IEC 60947-3 : 1999 Low-voltage switchgear and control gear — Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
IS/IEC 60947-4-1 : 2000 Low-voltage switchgear and control gear — Part 4 : Contractors and motor starters — Section 1 : Electromechanical contactors and motors-starters
IS/IEC 60947-4-1 : 2000 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 1 Electromechanical contactors and motors-starters
IS/IEC 60947-4-1 : 2000 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 1 Electromechanical contactors and motors-starters
IS/IEC 60947-4-2 : 1999 Low-voltage switchgear and control gear : Part 4 — Contractors and Motor- Starters, Section 2 A.C. Semiconductor Motor Controllers and Starters
IS/IEC 60947-4-2 : 2011 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 2 a.c. semiconductor motor controllers and starters (first revision)
IS/IEC 60947-4-2 : 2011 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 2 a.c. semiconductor motor controllers and starters (first revision)
IS/IEC 60947-4-3 : 1999 Low-voltage switchgear and control gear — Part 4: A.C. semiconductor controllers and contactors for non-motor loads
IS/IEC 60947-4-3 : 2011 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 3 a.c. semiconductor motor controllers and contactors for non-motor loads (first revision)
IS/IEC 60947-4-3 : 2011 Low-voltage switchgear and control gear — Part 4: Contractors and motor starters, Section 3 a.c. semiconductor motor controllers and contactors for non-motor loads (first revision)
IS/IEC 60947-5-1 : 2003 Low-voltage switchgear and control gear — Part 5 : Control circuit devices and switching elements, Section 1 : Electromechanical control circuit devices
IS/IEC 60947-5-1 : 2003 Low-voltage switchgear and control gear — Part 5: Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices
IS/IEC 60947-5-1 : 2003 Low-voltage switchgear and control gear — Part 5: Control circuit devices and switching elements, Section 1 Electromechanical control circuit devices
IS/IEC 60947-5-2 : 2007 Low-voltage switchgear and control gear — Part 5: Control circuit devices and switching elements, Section 2 Proximity switches
IS/IEC 60947-5-2 : 2007 Low-voltage switchgear and control gear — Part 5: Control circuit devices and switching elements, Section 2 Proximity switches
IS/IEC 60947-5-2 : 2007 Low-voltage switchgear and control gear — Part 5: Control circuit devices and switching elements, Section 2 Proximity switches
IS/IEC 61439 (Part 0) : 2014 Low-voltage switchgear and control gear assemblies — Part 0 Guidance to specifying assemblies
IS/IEC 62271-1 : 2007 High-voltage switchgear and control gear — Part 1: Common specifications
IS/IEC 62271-100 : 2008 High-voltage switchgear and control gear — Part 100: Alternating current circuit-breakers
IS/IEC 62271-103 : 2011 High-voltage switchgear and control gear — Part 103: Switches for rated voltages above 1 kV up to and including 52 kV
IS/IEC 62271-104 : 2009 High-voltage switchgear and control gear — Part 104: Alternating current for rated voltages of 52 kV and above
IS/IEC 62271-105 : 2002 High-voltage switchgear and control gear — Part 104: Alternating current switch-fuse combinations
IS/IEC 62271-111 : 2012 High-voltage switchgear and control gear — Part 104: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
IS/IEC 62271-200 : 2003 High-voltage switchgear and control gear — Part 104: a.c. metal enclosed switchgear and control gear for rated voltages above 1 kV and up to and including 52 kV
IS/IEC 62271-201 : 2006 High-voltage switchgear and control gear : Part 104: a.c. insulation enclosed switchgear and control-gear for rated voltages above 1 kV and up to and including 52 kV
IS/IEC 62271-202 : 2014 High-voltage switchgear and control gear Part 202: High-voltage/low-voltage prefabricated substation
IS/IEC 62271-203 : 2003 High-voltage switchgear and control gear — Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
IS/IEC 62305-1 : 2010 Protection against lightning :€” Part 1: General principles
IS/IEC 62305-2 : 2010 Protection against lightning : Part 2: Risk Management
IS/IEC 62305-3 : 2010 Protection against lightning :€” Part 3: Physical damage to structures and life hazard
IS/IEC 62305-4 : 2010 Protection against lightning : Part 4: Electrical and electronic systems within structures

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close