Home > Quality Control & IS Codes

IS Codes For ELECTRICAL WIRING, FITTINGS AND ACCESSORIES

Er. Parbhakar Dwivedi
0
 

       

IS Codes For ELECTRICAL WIRING, FITTINGS AND ACCESSORIES
IS 371 : 1999 Specification for ceiling roses (third revision)
IS 374 : 1979 Specification for electric ceiling type fans and regulators (third revision)
IS 418 : 2004 Specification for tungsten filament lamp for domestic and similar general lighting purposes (fourth revision)
IS 1258 : 2005 Specification for bayonet lamp holders (fourth revision)
IS 1293 : 2005 Specification for plugs and socket- outlets of rated voltage up to and including 250 volts and rated current
IS 1293 : 2005 up to and including 16 amperes (third revision)
IS 1554 : PVC insulated (heavy duty) electric cables
IS 1554 : (Part 1) : 1988 For working voltages up to and including 1 100 V (third revision)
IS 1554 : (Part 2) : 1988 For working voltages from 3.3 kV up to and including 11 kV (second revision)
IS 2086 : 1993 Specification for carriers and bases used in re-wirable type electric fuses up to 650 volts (third revision)
IS 2206 (Part 1) : 1984 Specification for flameproof electric lighting fittings: Well glass and bulkhead types (first revision)
IS 2215 : 2006 Specification for starters for fluorescent lamps (third revision)
IS 2412 : 1975 Specification for link clips for electrical wiring (first revision)
IS 2418 : Specification for tubular fluorescent lamps for general lighting services
IS 2418 : (Part 1) : 1977 Requirements and tests (first revision)
IS 2418 : (Part 2) : 1977 Standard lamp data sheets (first revision)
IS 2418 : (Part 3) : 1977 Dimensions of G-5 and G-13 bi-pin caps (first revision)
IS 2418 : (Part 4) : 1977 Go and no-go gauges for G-5 and G- 13 bi-pin caps (first revision)
IS 2675 : 1983 Specification for enclosed distribution fuseboards and cutouts for voltages not exceeding 1 000 V (second revision)
IS 3323 : 1980 Specification for bi-pin lamp holders for tubular fluorescent lamps (first revision)
IS 3324 : 1982 Specification for holders for starters for tubular fluorescent lamps (first revision)
IS 3419 : 1988 Specification for fittings for rigid non-metallic conduits (second revision)
IS 3480 : 1966 Specification for flexible steel conduits for electrical wiring
IS 3528 : 1966 Specification for waterproof electric lighting fittings
IS 3553 : 1966 Specification for watertight electric lighting fittings
IS 3837 : 1976 Specification for accessories for rigid steel conduits for electrical wiring (first revision)
IS 3854 : 1997 Specification for switches for domestic and similar purposes (second revision)
IS 4160 : 2005 Specification for interlocking switch socket outlets (first revision)
IS 4649 : 1968 Specification for adaptors for flexible steel conduits
IS 5077 : 1969 Specification for decorative lighting outfits
IS 8030 : 1976 Specification for luminaires for hospitals
IS 9537 : Specification for conduits for electrical installations
IS 9537 : (Part 1) : 1980 General requirements
IS 9537 : (Part 2) : 1981 Rigid steel conduits
IS 9537 : (Part 3) : 1983 Rigid plain conduits for insulating materials
IS 9537 : (Part 4) : 1983 Pliable self-recovering conduits for insulating materials
IS 9537 : (Part 5) : 2000 Pliable conduits of insulating materials
IS 9537 : (Part 6) : 2000 Pliable conduits of metal or composite materials
IS 9537 : (Part 8) : 2003 Rigid non thread able conduits of aluminium alloy
IS 9926 : 1981 Specification for fuse wires used in rewirable type electric fuses up to 650 volts
IS 10322 : Specification for luminaires
IS 10322 : (Part 1) : 2014 General requirements and tests (first revision)
IS 10322 : (Part 2) : 1982 Constructional requirements
IS 10322 : (Part 3) : 1984 Screw and crewless terminations
IS 10322 : (Part 4) : 1984 Methods of tests
IS 10322 : (Part 5/Sec 1) : 2012 Particular requirements, Section 1 General purpose luminaires (first revision)
IS 10322 : (Part 5/Sec 2) : 2012 Particular requirements, Section 2 Recessed luminaires (first revision)
IS 10322 : (Part 5/Sec 3) : 2012 Particular requirements, Section 3 Luminaires for road and street lighting (first revision)
IS 10322 : (Part 5/Sec 4) : 1987 Particular requirements, Section 4 Portable general purpose luminaires
IS 10322 : (Part 5/Sec 5) : 2013 Particular requirements, Section 5 Flood light (first revision)
IS 10322 : (Part 5/Sec 6) : 2013 Particular requirements, Section 6 Hand lamps
IS 10322 : (Part 5/Sec 7) : 2013 Particular requirements, Section 7 Lighting chains
IS 10322 : (Part 5/Sec 8) : 2013 Particular requirements, Section 8 Emergency lighting
IS 11037 : 1984 Electronic type fan regulators
IS 12449 : Starting devices (other than glow starters)
IS 12449 : (Part 1) : 1988 General and safety requirements
IS 12449 : (Part 2) : 1988 Performance requirements
IS 12776 : 2002 Specification for galvanized strand for earthing (first revision)
IS 13010 : 2002 AC watt-hour meters, Class 0.5, 1 and 2 (first revision)
IS 13779 : 1999 AC static watt-hour meters (Class 1 and 2) (first revision)
IS 13947 (Part 5/ Specification for low-voltage Sec 2) : 2004 switchgear and control gear: Part 5 Control circuit devices and switching elements, Section 2 Proximity switches
IS 14763 : 2000 Conduit for electrical purposes, outside diameters of conduits for electrical installations and threads for conduits and fittings
IS 14768 : Conduit fittings for electrical installations
IS 14768 : (Part 1) : 2000 General requirements
IS 14768 : (Part 2) : 2003 Metal conduit fittings
IS 14772 : 2000 Enclosures for accessories for household and similar fixed electrical installations
IS 14927 : Cable trunking and ducting systems for electrical installations
IS 14927 : (Part 1) : 2001 General requirements
IS 14927 : (Part 2) : 2001 Cable trunking and ducting systems intended for mounting on walls or ceilings
IS 14930 : Conduit systems for electrical installations
IS 14930 : (Part 1) : 2001 General requirements
IS 14930 : (Part 2) : 2001 Particular requirements for conduit system buried underground
IS 15111 : Self-ballasted lamps for general lighting services:
IS 15111 : (Part 1) : 2002 Safety requirements
IS 15111 : (Part 2) : 2002 Performance requirements
IS 15368 : 2003 Cable reels for household and similar purposes
IS 15518 (Part 1) : 2004 Safety requirements for incandescent lamps: Part 1 Tungsten filament lamps for domestic and similar general lighting purposes
IS 15787 : 2008 Switch-socket-outlets (non-interlock type)
IS 15968 : 2013 Ballasts for tubular fluorescent lamps. Performance requirements
IS 15974 : 2013 Auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
IS 16102 : Self-ballasted LED-lamps for general lighting services
IS 16102 : (Part 1) : 2012 Safety requirements
IS 16102 : (Part 2) : 2012 Performance requirements
16103 : LED modules for general lighting
16103 : (Part 1) : 2012 Safety specification
16103 : (Part 2) : 2012 Performance requirements
IS 16148 : 2014 Performance specification for metal halide lamps
IS 16246: 2015 S Pacification for elastomer insulated cables with limited circuit integrity when affected by fire
IS/IEC 60079-1: 2007 Explosive atmospheres Part 1 : Equipment protection by flameproof enclosures .d.
IS/IEC 60898-1: 2002 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Part 1: Circuit- breakers for ac operation
IS/IEC 60947-1 : 2007 Low voltage switchgear and control gear .Part 1: General rules (first revision)
IS/IEC 60947-2 : 2003 Low voltage switchgear and control gear. Part 2: Circuit breakers
IS/IEC 60947-3 : 1999 Low voltage switchgear and control gear. Part 3: Switches, disconnectors, switch-disconnectors and fuse combination units
IS/IEC 60794- 1-1: 2001 Optical fibre cables. Part 1: Generic specification, Section 1 General
IS/IEC 60794- 1-2 : 2003 Optical fibre cables. Part 1: Generic specification, Section 2 Basic optical cable test procedures
IS/IEC 60794-2: 2002 Optical fibre cables. Part 2 Sectional specification for indoor cables

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close