Home > Quality Control & IS Codes

IS Codes For FLOOR COVERING, ROOFING AND OTHER FINISHES

Er. Parbhakar Dwivedi
0
 

       

It is base document outlining policy, procedures and endeavors to meet the requirement by three pronged strategy.

  1. Concrete Flooring
  2. Flooring Compositions
  3. Linoleum Flooring
  4. Rubber Flooring
  5. Stone Flooring
  6. Bituminous Flooring
  7. Plastic Flooring
  8. Ceramic / Vitreous Flooring and Wall Finishing
  9. Clay Flooring
  10. Roofing
  11. Other Floorings and Roofing
  12. Wall Coverings / Finishing / Cladding
1. Concrete Flooring
IS 1237 : 2012 Specification for cement concrete flooring tiles (second revision)
IS 6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
IS 13801 : 2013 Specification for Chequered cement concrete tiles (first revision)
IS 13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
IS 14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
IS 15658 : 2006 Specification for precast concrete blocks for paving
2. Flooring Compositions
IS 657 : 1982 Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (second revision)
IS 9162 : 1979 Methods of tests for epoxy resin, hardeners and epoxy resin composition for floor topping
IS 9197 : 1979 Specification for epoxy resin, hardness and epoxy resin compositions for floor topping
IS 10132 : 1982 Method of test for materials for use in the preparation of magnesium oxychloride flooring composition
3. Linoleum Flooring
IS 653 : 1992 Specification for linoleum sheets and tiles (third revision)
IS 9704 : 1980 Methods of tests for linoleum sheets and tiles
4. Rubber Flooring
IS 809 : 1992 Specification for rubber flooring materials for general purposes (first revision)
5. Stone Flooring
IS 1128 : 1974 Specification for limestone (slab and tiles) (first revision)
IS 1130 : 1969 Specification for marble (blocks, slabs and tiles)
IS 3316 : 1974 Specification for structural granite (first revision)
IS 3622 : 1977 Specification for sand stone (slabs and tiles) (first revision)
IS 14223 (Part 1) : 1994 Specification for polished building stones: Part 1 Granite
6. Bituminous Flooring
IS 1195 : 2002 Specification for bitumen mastic for flooring (third revision)
IS 5317 : 2002 Specification for pitch-mastic for bridge decking and roads (second revision)
IS 8374 : 1977 Specification for bitumen mastic, anti-static and electrically conducting grade
IS 9510 : 1980 Specification for bitumen mastic acid resisting grade
IS 13026 : 1991 Specification for bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products
IS 15194 : 2002 Specification for pitch-mastic flooring for industries handling heavy hydrocarbon products like kerosene, diesel and furnace oil
7. Plastic Flooring
IS 3461 : 1980 Specification for PVC asbestos floor tiles (first revision)
IS 3462 : 1986 Specification for unbacked flexible PVC flooring (second revision)
IS 3464 : 1986 Methods of test for plastic flooring and wall tiles (second revision)
8. Ceramic / Vitreous Flooring and Wall Finishing
IS 2333 : 1992 Specification for plaster of Paris for ceramic industry (second revision)
IS 4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
IS 13630 : Ceramic tiles. Methods of test, sampling and basis for acceptance
IS 13630 : (Part 1) : 2006 Determination of dimensions and surface quality (first revision)
IS 13630 : (Part 2) : 2006 Determination of water absorption and bulk density (first revision)
IS 13630 : (Part 3) : 2006 Determination of moisture expansion using boiling water. Unglazed tiles (first revision)
IS 13630 : (Part 4) : 2006 Determination of linear thermal expansion (first revision)
IS 13630 : (Part 5) : 2006 Determination of resistance to thermal shock (first revision)
IS 13630 : (Part 6) : 2006 Determination of modulus of rupture and breaking strength (first revision)
IS 13630 : (Part 7) : 2006 Determination of chemical resistance. Unglazed tiles (first revision)
IS 13630 : (Part 8) : 2006 Determination of chemical resistance. Glazed tiles (first revision)
IS 13630 : (Part 9) : 2006 Determination of crazing resistance. Glazed tiles (first revision)
IS 13630 : (Part 10) : 2006 Determination of frost resistance (first revision)
IS 13630 : (Part 11) : 2006 Determination of resistance to surface abrasion. Glazed tiles (first revision)
IS 13630 : (Part 12) : 2006 Determination of resistance to deep abrasion. Unglazed tiles (first revision)
IS 13630 : (Part 13) : 2006 Determination of scratch hardness of surface according to Mohs.(first revision)
IS 13630 : (Part 14) : 2006 Determination of impact resistance by measurement of coefficient of restitution
IS 13630 : (Part 15) : 2006 Ceramic tiles. Sampling and basis for acceptance
IS 13712 : 2006 Ceramic tiles. Definitions, classifications, characteristics and marking (first revision)
IS 15622 : 2006 Specification for pressed ceramic tiles
9. Clay Flooring
IS 1478 : 1992 Specification for clay flooring tiles (second revision)
IS 3951 : Specification for hollow clay tiles for floor and roofs
IS 3951 : (Part 1) : 2009 Filler type (second revision)
IS 3951 : (Part 2) : 2009 Structural type (second revision)
10. Roofing
IS 277 : 2003 Galvanized steel sheets (plain and corrugated) .Specification (sixth revision)
IS 459 : 1992 Specification for corrugated and semi-corrugated asbestos cement sheets (third revision)
IS 654 : 1992 Specification for clay roofing tiles, Mangalore pattern (third revision)
IS 1464 : 1992 Specification for clay ridge and ceiling tiles (second revision)
IS 2690 : Specification for burnt clay flat terracing tiles
IS 2690 : (Part 1) : 1993 Machine made (second revision)
IS 2690 : (Part 2) : 1992 Handmade (second revision)
IS 3951 : Specification for hollow clay tiles for floor and roofs
IS 3951 : (Part 1) : 2009 Filler type (second revision)
IS 3951 : (Part 2) : 2009 Structural type (second revision)
IS 6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
IS 6250 : 1981 Specification for roofing slate tiles (first revision)
IS 10388 : 1982 Specification for corrugated coir wood wool cement roofing sheets
IS 12583 : 1988 Specification for corrugated bitumen roofing sheets
IS 12866 : 1989 Specification for plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced)
IS 13317 : 1992 Specification for clay roofing country tiles, half round and flat tiles
IS 13990 : 1994 Specification for precast reinforced concrete planks and joists for flooring and roofing
IS 14201 : 1994 Specification for precast reinforced concrete channel units for construction of floors and roofs
IS 14241 : 1995 Specification for precast L-Panel units for roofing
11. Other Floorings and Roofing
IS 4456 : Methods of test for chemical resistant mortars
IS 4456 : (Part 1) : 1967 Silicate type and resin type
IS 4456 : (Part 2) : 1967 Sulphur type
IS 4457 : 2007 Specification for ceramic unglazed vitreous acid resisting tile (second revision)
IS 4832 : Specification for chemical resistant mortars
IS 4832 : (Part 1) : 1969 Silicate type
IS 4832 : (Part 2) : 1969 Resin type
IS 4832 : (Part 3) : 1968 Sulphur type
IS 4860 : 1968 Specification for acid resistant bricks
IS 14862 : 2000 Specification for fibre cement flat sheets
IS 14143 : 1994 Specification for prefabricated brick panel and partially precast concrete joist for flooring and roofing
IS 14871 : 2000 Specification for products in fibre reinforced cement. Long corrugated or asymmetrical section sheets and fittings for roofing and cladding

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close