Home > Quality Control & IS Codes

IS Codes For LANDSCAPE DEVELOPMENT AND IS CODES FOR APPROACHES TO SUSTAINABILITY

Er. Parbhakar Dwivedi
0
 

       

IS Codes For LANDSCAPE DEVELOPMENT AND IS Codes For APPROACHES TO SUSTAINABILITY
IS 201 : 1992 Quality tolerances for water for textile industry(second revision)
IS 303 : 1989 Specification for plywood for general purposes (third revision)
IS 401 : 2001 Code of practice for preservation of timber (fourth revision)
IS 401 : 2001 Code of practice for preservation of timber (fourth revision)
IS 455 : 2015 Specification for Portland Slag cement (fifth revision)
IS 456 : 2000 Code of practice for plain and reinforced concrete (fourth revision)
IS 456 : 2000 Code of practice for plain and reinforced concrete (fourth revision)
IS 456 : 2000 Code of practice for plain and reinforced concrete (fourth revision)
IS 457 : 1957 Code of practice for general construction of plain and reinforced concrete for dams and other massive structures
IS 458 : 2003 Specification for precast concrete pipes (with and without reinforcement) (fourth revision)
IS 459 : 1992 Specification for unreinforced corrugated and semi-corrugated asbestos cement sheets (third revision)
IS 653 : 1992 Specification for linoleum sheets and tiles (third revision)
IS 710 : 2010 Specification for marine plywood (second revision)
ISO 817 : 2014 Designation and safety classification of refrigerants (under preparation)
IS 1141 : 1993 Code of practice for seasoning of timber (second revision)
IS 1198 : 1982 Code of practice for laying, fixing and maintenance of linoleum floor (first revision)
IS 1237 : 2012 Specification for cement concrete flooring tiles (second revision)
IS 1328 : 1996 Specification for veneered decorative plywood (third revision)
IS 1332 : 1986 Specification for precast reinforced concrete steel lighting poles (first revision)
IS 1343 : 2012 Code of practice for prestressed concrete (second revision)
IS 1343 : 2012 Code of practice for prestressed concrete (second revision)
IS 1443 : 1972 Code of practice for laying and finishing of cement concrete flooring tiles (first revision)
IS 14587 : 1998 Specification for Prelaminated medium density fibre board
IS 14588 : 1999 Specification for bamboo mat veneer composite for general purposes
IS 14616 : 1999 Specification for laminated veneer lumber
IS 14842 : 2000 Specification for coir veneer board for general purposes
IS 14862 : 2000 Specification for fibre cement flat sheets
IS 14862 : 2000 Specification for fibre cement flat sheets
IS 14871 : 2000 Specification for products in fibre reinforced cement. Long corrugated or asymmetrical section sheet and fittings for roofing and cladding
IS 14871 : 2000 Specification for products in fibre reinforced cement long corrugated or asymmetrical section sheets and fittings for roofing and cladding
IS 1489 Specification for Portland- pozzolana cement:
IS 1489 (Part 1) : 2015 Fly ash based (fourth revision)
IS 1489 (Part 2) : 2015 Calcined clay based (fourth revision)
IS 1592 : 2003 Specification for asbestos cement pressure pipes and joints (fourth revision)
IS 1626 Specification for asbestos cement building pipes and pipe fittings, gutters and gutter fittings and roofing fittings:
IS 1626 (Part 1) : 1994 Pipe and pipe fittings (second revision)
IS 1626 (Part 2) : 1994 Gutters and gutter fittings (second revision)
IS 1626 (Part 3) : 1994 Roofing accessories (second revision)
IS 1658 : 2006 Specification for fibre hardboards (third revision)
IS 1659 : 2004 Specification for block boards (fourth revision)
IS 1661 : 1972 Code of practice for application of cement and cement-lime plaster finish (first revision)
IS 1725 : 2013 Specification for stabilized soil blocks used in general building construction (second revision)
IS 1727 : 1967 Methods of test for pozzolanic materials (first revision)
IS 2095 Specification for gypsum plaster boards:
IS 2095 (Part 1) : 2011 Plain gypsum plaster boards (third revision)
IS 2095 (Part 2) : 2001 Coated/laminated gypsum plaster boards (second revision)
IS 2095 (Part 3) : 1996 Reinforced gypsum plaster boards (second revision)
IS 2096 : 1992 Specification for asbestos cement flat sheets (first revision)
IS 2098 : 1997 Specification for asbestos cement building boards (first revision)
IS 2114 : 1984 Code of practice for laying in-situ terrazzo floor finish (first revision)
IS 2115 : 1980 Code of practice for flat roof finish: Mud phuska (second revision)
IS 2117 : 1991 Guide for manufacture of hand- made common burnt clay building bricks (third revision)
IS 2185 Specification for concrete masonry units:
IS 2185 Specification for concrete masonry units:
IS 2185 (Part 1) : 2005 Hollow and solid concrete blocks (third revision)
IS 2185 (Part 1) : 2005 Hollow and solid concrete blocks (third revision)
IS 2185 (Part 2) : 1983 Hollow and solid light-weight concrete blocks (first revision)
IS 2185 (Part 2) : 1983 Hollow and solid lightweight concrete blocks (first revision)
IS 2185 (Part 3) : 1984 Autoclaved cellular aerated, concrete blocks (first revision)
IS 2185 (Part 3) : 1984 Autoclaved cellular (aerated) concrete blocks (first revision)
IS 2185 (Part 4) : 2008 Preformed foam cellular concrete blocks
IS 2185 (Part 4) : 2008 Preformed foam cellular concrete blocks
IS 2250 : 1981 Code of practice for preparation and use of masonry mortars (first revision)
IS 2541 : 1991 Code of practice for preparation and use of lime concrete (second revision)
IS 2547 Specification for gypsum building plaster:
IS 2547 (Part 1) : 1976 Excluding premixed lightweight plaster (first revision)
IS 2547 (Part 2) : 1976 Premixed lightweight plaster (first revision)
IS 2553 : (Part 1) : 1990 Specification for safety glass (Part 1) : General purpose (third revision)
IS 2553 : (Part 2) : 1992 Specification for safety glass (Part 2) : For road transport
IS 2572 : 2005 Code of Practice for construction of hollow concrete block masonry (first revision)
IS 2686 : 1977 Specification for cinder as fine aggregates for use in lime concrete (first revision)
IS 2724 : 1964 Quality tolerances for water for pulp and paper
IS 2725 : 1964 Quality tolerances for water for rayon- manufacturing industry
IS 3068 : 1986 Specification for broken brick (burnt clay) coarse aggregates for use in lime concrete (second revision)
IS 3087 : 2005 Specification for wood particle boards (medium density) for general purposes (second revision)
IS 3097 : 2006 Specification for veneered particle boards (second revision)
IS 3115 : 1992 Specification for lime based blocks (second revision)
IS 3129 : 1985 Specification for low density particle board (first revision)
IS 3182 : 1986 Specification for broken brick (burnt clay) fine aggregates for use in lime mortar (second revision)
IS 3308 : 1981 Specification for wood wool building slabs (first revision)
IS 3328 : 1993 Quality tolerances for water for swimming pools (first revision)
IS 3370 Code of practice for concrete structures for storage of liquids:
IS 3370 (Part 1) : 2009 General requirements (first revision)
IS 3370 (Part 2) : 2009 Reinforced concrete structures (first revision)
IS 3466 : 1988 Specification for masonry cement (second revision)
IS 3677 : 1985 Specification for unbounded rock and slag wool for thermal insulation (second revision)
IS 3792 : 1978 Guide for heat insulation of non- industrial buildings (first revision)
IS 3808 : 1979 Method of test for non- combustibility of building materials (first revision)
IS 3812 Specification for pulverized fuel ash:
IS 3812 (Part 1) : 2013 For use as Pozzolana in cement, cement mortar and concrete (third revision)
IS 3812 (Part 2) : 2013 For use as admixture in cement mortar and concrete (third revision)
IS 3957 : 1966 Quality tolerances for water for ice manufacture 
IS 4021 : 1995 Specification for timber door, window and ventilator frames (third revision)
vIS 4082 : 1996 Recommendations on stacking and storage of construction materials and components at site (second revision)
IS 4098 : 1983 Specification for lime-pozzolana mixture (first revision)
IS 4130 : 1991 Safety code for demolition of buildings (second revision)
IS 4139 : 1989 Specification for calcium silicate bricks (second revision)
IS 4221 : 1967 Quality tolerances for water for tanning industry
IS 4251 : 1967 Quality tolerances for water for processed food industry 
IS 4443 : 1980 Code of practice for use of resin type chemical resistant mortars (first revision)
IS 4700 : 1968 Quality tolerances for water for fermentation
IS 4832 Specification for chemical resistant mortars:
IS 4832 (Part 1) : 1969 Specification for chemical resistant mortars: (Part 1) Silicate type
IS 4832 (Part 2) : 1969 Specification for chemical resistant mortars: (Part 2) Resin type
IS 4832 (Part 3) : 1969 Specification for chemical resistant mortars: (Part 3) Sulphur type
IS 4926 : 2003 Code of practice for ready-mixed concrete (second revision)
IS 4926 : 2003 Code of practice for ready-mixed concrete (second revision)
IS 4990 : 2011 Specification for plywood for concrete shuttering work (third revision)
IS 5509 : 2000 Specification for fire retardant plywood (second revision)
IS 5817 : 1992 Code of practice for preparation and use of lime pozzolana mixture concrete in buildings and roads (first revision)
IS 5820 : 1970 Specification for precast concrete cable cover
IS 6041 : 1985 Code of practice for construction of autoclaved cellular concrete block masonry (first revision)
IS 6041 : 1985 Code of Practice for construction of autoclaved cellular concrete block masonry (first revision)
IS 6042 : 1969 Code of practice for construction of lightweight concrete block masonry
IS 6042 : 1969 Code of Practice for construction of lightweight concrete block masonry
IS 6066 : 1994 Recommendations for pressure grouting of rock foundations in river valley projects (second revision)
IS 6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs
IS 6073 : 2006 Specification for autoclaved reinforced cellular concrete floor and roof slabs (first revision)
IS 6523 : 1983 Specification for precast reinforced concrete door and window frames (first revision)
IS 6598 : 1972 Specification for cellular concrete for thermal insulation
IS 6908 : 1991 Specification for asbestos cement pipes and fittings for sewerage and drainage (first revision)
IS 7969 : 1975 Safety code for handling and storage of building materials
IS 8183 : 1993 Specification for bonded mineral wool (first revision)
IS 8188 : 1999 Treatment of Water for Cooling Towers. Code of Practice
IS 8229 : 1986   Specification for oil well cement (first revision)
IS 8272 : 1984 Specification for gypsum plaster for use in the manufacture of fibrous plasterboards (first revision)
IS 8914 : 1988 Quality tolerances for water for vitreous enamel industry (first revision)
IS 9142 : 1979 Specification for artificial lightweight aggregates for concrete masonry units
IS 9142 : 1979 Specification for artificial light- weight aggregates for concrete masonry units
IS 9142 : 1979 Specification for artificial light- weight aggregates for concrete masonry units
IS 9375 : 1979 Specification for precast reinforced concrete plant guards
IS 9627 : 1980 Specification for asbestos cement pressure pipes (light duty)
IS 9872 : 1981 Specification for precast concrete septic tanks
IS 9893 : 1981 Specification for precast concrete lintels and sills
IS 10049 : 1981 Code of practice for manufacture of lime based blocks
IS 10262 : 2009 Guidelines for concrete mix proportioning (first revision)
IS 10359 : 1982 Code of practice for manufacture and use of lime-pozzolana concrete blocks for paving
IS 10360 : 1982 Specification for lime-pozzolana concrete blocks for paving
IS 10392 : 1982 Specification for feed water and boiler water for low and medium pressure boilers
IS 10496 : 1983 Specification for feed water, boiler water and condensate for high pressure boilers
IS 10500 : 2012 Drinking water (second revision)
IS 10772 : 1983 Specification for quick setting lime-pozzolana mixture
IS 11293 Guidelines for design of grout curtains:
IS 11293 (Part 1) : 1985 Earth and rock fill dams
IS 11293 (Part 2) : 1993 Masonry and concrete dams
IS 11624 : 1986 Guidelines for the quality of irrigation water
IS 11650 : 1991 Guide for manufacture of common burnt clay building bricks by semi-mechanized process (first revision)
IS 12089 : 1987 Specification for granulated slag for manufacture of Portland slag cement
IS 12406 : 2003 Specification for medium density fibre boards for general purposes (first revision)
IS 12440 : 1988 Specification for precast concrete stone masonry blocks
IS 12440 : 1988 Specification for precast concrete stone masonry blocks
IS 12592 : 2002 Specification for precast concrete manhole cover and frame (first revision)
IS 12615 : 2011 Energy efficient induction motors. Three phase squirrel cage (second revision)
IS 12679 : 1989 Specification for by-product gypsum for use in plaster, blocks and boards
IS 12823 : 2015 Specification for wood products. Prelaminated particle boards (first revision)
IS 12894 : 2002 Specification for pulverized fuel ash lime bricks (first revision)
IS 13000 : 1990   Specification for silica-asbestos cement flat sheets
IS 13008 : 1990 Specification for shallow corrugated asbestos cement sheets
IS 13077 : 1991 Guide for preparation and use of mud mortar in masonry
IS 13757 : 1993 Specification for burnt clay fly ash building bricks
IS 13891 : 1994 Quality tolerances for freshwater for fish culture
IS 13958 : 1994 Specification for bamboo mat board for general purposes
IS 15380 : 2003 Specification for moulded raised high density fibre (HDF) panel doors
IS 15388 : 2003 Specification for silica fume
IS 15476 : 2004 Specification for bamboo and corrugated sheets
IS 15491 : 2004 Specification for medium density coir boards for general purposes
IS 15622 : 2006 Specification for pressed ceramic tiles
IS 15648 : 2006 Specification for pulverized fuel ash for lime pozzolana mixture application
IS 15792 : 2008 Guidelines for artificial recharge to groundwater
IS 15797 : 2008 Guidelines for roof top rainwater harvesting
IS 15877 : 2010 Specification for coir faced block boards
IS 15878 : 2010 Specification for coir hardboard for general purposes
IS 15883 (Part 1) : 2009 Guidelines for construction project management: Part 1 General
IS 15916 : 2011 Code of practice for building design and erection using prefabricated concrete
IS 15917 : 2010 Code of practice for building design and erection using mixed/ composite construction

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close