Home > Quality Control & IS Codes

IS Codes for steel and it's alloys

Er. Parbhakar Dwivedi
0
 

       

It is base document outlining policy, procedures and endeavors to meet the requirement by three pronged strategy.

  1. General
  2. Structural Steel
  3. Sheet and Strip
  4. Bars, Rods, Wire Rods
  5. Plates and Studs
  6. Tubes and Tubulars
  7. Slotted Sections
1. General
IS 1030 : 1998 Carbon steel castings for general engineering purposes (fifth revision)
IS 1136 : 2008 Preferred sizes for wrought metal products (third revision)
IS 1762 (Part 1) : 1974 Code for designation of steels: Part 1 Based on letter symbols (first revision)
IS 2049 : 1978 Colour code for the identification of wrought steel for general engineering purposes (first revision)
IS 2644 : 1994 High tensile steel castings (fourth revision)
IS 2708 : 1993 Specification for 1.5 percent manganese steel castings for general engineering purposes (third revision)
IS 7598 : 1990 Classification of steels (first revision)
IS 10461 Resistance to inter-granular corrosion of austenitic stainless steels. Method for determination
(Part 1) : 1994 Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (first revision)
(Part 2) : 1994 Corrosion test in a sulphuric acid/ copper sulphate medium in the presence of copper turnings (Monypenny Strauss Test) (first revision)
2. Structural Steel
 
IS 2062 : 2011 Specification for hot rolled medium and high tensile structural steel (seventh revision)
IS 2830 : 2012 Specification for carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general
structural purposes (third revision)
IS 2831 : 2012 Specification for carbon steel cast billets ingots, blooms and slabs for re-rolling into structural steel (Ordinary quality) (fourth revision)
IS 8052 : 2006 Specification for steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications (second revision)
IS 8952 : 1995 Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes (first revision)
IS 11587 : 1986 Specification for structural weather resistant steels
IS 15103 : 2002 Fire resistant steel
IS 15911 : 2010 Structural steel (Ordinary quality)
IS 15962 : 2012 Structural steels for buildings and structures with improved seismic resistance
3. Sheet and Strip
IS 277 : 2003 Specification for galvanized steel sheets (plain and corrugated) (sixth revision)
IS 412 : 1975 Specification for expanded metal steel sheets for general purposes (second revision)
IS 513 : 2008 Specification for cold reduced low carbon steel sheets and strips (fifth revision)
IS 1079 : 2009 Specification for hot rolled carbon steel sheet and strip (sixth revision)
IS 6911 : 1992 Stainless steel plate, sheet and strip (first revision)
IS 7226 : 1974 Specification for cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
IS 14246 : 2013 Specification for continuously pre- painted galvanized steel sheets and coils (first revision)
IS 15961 : 2012 Hot-dip
IS 15965 : 2012 Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (plain)
IS 12313: 1988 Specification for hot-dip terne coated carbon steel sheets
4. Bars, Rods, Wire Rods
IS 280 : 2006 Specification for mild steel wire for general engineering purposes (fourth revision)
IS 1148 : 2009 Steel rivet bars (medium and high tensile) for structural purposes (fourth revision)
IS 1673 : 1984 Specification for mild steel wire cold heading quality (second revision)
IS 1812 : 1982 Specification for carbon steel wire for the manufacture of wood screw (second revision)
IS 1835 : 1976 Specification for round steel wire for ropes (third revision)
IS 1875 : 1992 Carbon steel billets, blooms, slabs and bars for forgings (fifth revision)
IS 1921 : 2005 Specification for resin cored solder wire (second revision)
IS 2591 : 1982 Dimensions for hot rolled bars for threaded components (second revision)
IS 3150 : 1982 Specification for hexagonal wire netting for general purposes
IS 4826 : 1979 Specification for hot-dipped galvanized coatings on round steel wires (first revision)
IS 6527 : 1995 Stainless steel wire rod (first revision)
IS 6528 : 1995 Specification for stainless steel wire (first revision)
IS 6603 : 2001 Specification for stainless steel bars and flats (first revision)
IS 7887 : 1992 Specification for mild steel wire rods for general engineering purposes (first revision)
IS 7904 : 1995 Specification for high-carbon steel wire rods (first revision)
IS 10631 : 1983 Stainless steel for welding electrode core wire
IS/ISO 16124 : 2004 Steel wire rod. Dimensions and tolerances
5. Plates and Studs
IS 1862 : 1975 Specification for studs (second revision)
IS 3502 : 2009 Specification for steel Chequered plates (third revision)
6. Tubes and Tubulars
IS 1161 : 2014 Specification for steel tubes for structural purposes (fifth revision)
IS 4923 : 1997 Specification for hollow mild steel sections for structural use (second revision)
7. Slotted Sections
IS 8081 : 1976 Specification for slotted sections

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close