Home > Quality Control & IS Codes

IS Codes For THERMAL INSULATION MATERIALS

Er. Parbhakar Dwivedi
0
 

       

IS Codes For THERMAL INSULATION MATERIALS
IS 3144 : 1992 Methods of test for mineral wool thermal insulation material (second revision)
IS 3346 : 1980 Methods for the determination of thermal conductivity of thermal insulation materials (two slab, guarded hot-plate method (first revision)
IS 3677 : 1985 Specification for unbonded rock and slag wool for thermal insulation (second revision)
IS 4671 : 1984 Specification for expanded polystyrene for thermal insulation purposes (first revision)
IS 5688 : 1982 Methods of test for preformed block- type and pipe-covering type thermal insulation (first revision)
IS 5724 : 1970 Methods of test for thermal insulating cement
IS 6598 : 1972 Specification for cellular concrete for thermal insulation
IS 7509 : 1993 Specification for thermal insulating cement (first revision)
IS 8154 : 1993 Specification for preformed calcium silicate insulation for temperature up to 650°C (first revision)
IS 8183 : 1993 Specification for bonded mineral wool (first revision)
IS 9403 : 1980 Method of test for thermal conductance and transmittance of built up sections by means of guarded hot box
IS 9489 : 1980 Method of test for thermal conductivity of materials by means of heat flow meter
IS 9490 : 1980 Method of determination for thermal conductivity of insulation materials (water calorimeter method)
IS 9742 : 1993 Specification for sprayed mineral wool thermal insulation (first revision)
IS 9743 : 1990 Specification for thermal insulation finishing cements (first revision)
IS 9842 : 1994 Specification for preformed fibrous pipe insulation (first revision)
IS 11128 : 1994 Specification for spray applied hydrated calcium silicate thermal insulation
IS 11129 : 1984 Method of test for tumbling friability of preformed block-type thermal insulation
IS 11239 : Method of test for rigid cellular thermal insulation materials
IS 11239 : (Part 1) : 2009 Dimensions (first revision)
IS 11239 : (Part 2) : 2009 Apparent density (first revision)
IS 11239 : (Part 3) : 2009 Dimensional stability (first revision)
IS 11239 : (Part 4) : 1985 Water vapour transmission rate (first revision)
IS 11239 : (Part 5) : 2009 Volume percent of open and closed cells (first revision)
IS 11239 : (Part 6) : 1985 Heat distortion temperature
IS 11239 : (Part 7) : 1985 Coefficient of linear thermal expansion at low temperatures
IS 11239 : (Part 8) : 1985 Flame height, time of burning and loss of mass
IS 11239 : (Part 9) : 1988 Water absorption
IS 11239 : (Part 10) : 1985 Flexural strength
IS 11239 : (Part 11) : 1985 Compressive strength
IS 11239 : (Part 12) : 1988 Horizontal burning characteristics
IS 11239 : (Part 13) : 1992 Determination of flammability by oxygen index
IS 11307 : 1985 Specification for cellular glass block and pipe thermal insulating
IS 11308 : 1985 Specification for thermal insulating castables (hydraulic setting) for temperatures up to 1 250°C
IS 12436 : 1988 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation
IS 13204 : 1991 Specification for rigid phenolic foams for thermal insulation
IS 13286 : 1992 Methods of test for surface spread of flame for thermal insulation materials
IS 14656 : 1999 Ceramic fibre products. Methods of test

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close