Home > Quality Control & IS Codes

IS Codes For TIMBER, BAMBOO AND OTHER LIGNOCELLULOSIC BUILDING MATERIALS

Er. Parbhakar Dwivedi
0
 

       

a. Timber and Bamboo

  1. Timber Classification
  2. Timber Conversion and Grading
  3. Timber Testing
  4. Structural Timber Tests
  5. Logs
  6. Bamboo

b. Reconstitu Products

  1. Plywood
  2. Block boards, Particle Boards and Fibre Boards
  3. Wood-Based Laminates and Lumber
  4. Bamboo and Coir Board Products
  5. Adhesives
a. Timber and Bamboo

1. Timber Classification

IS 287 : 1993 Permissible moisture content for timber used for different purposes. Recommendations (third revision)
IS 399 : 1963 Classification of commercial timbers and their zonal distribution (revised)
IS 1150 : 2000 Trade names and abbreviated symbols for timber species (third revision)
IS 4970 : 1973 Key for identification of commercial timber (first revision)

2. Timber Conversion and Grading

IS 190 : 1991 Specification for coniferous sawn timber (baulks and scantlings) (fourth revision)
IS 1326 : 1992 Specification for non-coniferous sawn timber (baulks and scantlings) (second revision)
IS 1331 : 1971 Specification for cut sizes of timber (second revision)
IS 2377 : 1967 Tables for volumes of cut sizes of timber (first revision)
IS 3337 : 1978 Specification for ballies for general purposes (first revision)
IS 3386 : 1979 Specification for wooden fence posts (first revision)
IS 5966 : 1993 Specification for non-coniferous timber in converted form for general purpose (first revision)
IS 14960 : 2001 Specification for preservative treated and seasoned sawn timber from rubber wood (Hevea brasiliensis)

3. Timber Testing

IS 1708 : Methods of testing small clear specimens of timber
IS 1708 : (Part 1) : 1986 Determination of moisture content (second revision)
IS 1708 : (Part 2) : 1986 Determination of specific gravity (second revision)
IS 1708 : (Part 3) : 1986 Determination of volumetric shrinkage (second revision)
IS 1708 : (Part 4) : 1986 Determination of radial and tangential shrinkage and fibre saturation point (second revision)
IS 1708 : (Part 5) : 1986 Determination of static bending strength (second revision)
IS 1708 : (Part 6) : 1986 Determination of static bending strength under two point loading (second revision)
IS 1708 : (Part 7) : 1986 Determination of impact bending strength (second revision)
IS 1708 : (Part 8) : 1986 Determination of compressive strength parallel to grain (second revision)
IS 1708 : (Part 9) : 1986 Determination of compressive strength perpendicular to grain (second revision)
IS 1708 : (Part 10) : 1986 Determination of hardness under static indentation (second revision)
IS 1708 : (Part 11) : 1986 Determination of shear strength parallel to grain (second revision)
IS 1708 : (Part 12) : 1986 Determination of tensile strength parallel to grain (second revision)
IS 1708 : (Part 13) : 1986 Determination of tensile strength perpendicular to grain (second revision)
IS 1708 : (Part 14) : 1986 Determination of cleavage strength parallel to grain (second revision)
IS 1708 : (Part 15) : 1986 Determination of nail and screw holding power (second revision)
IS 1708 : (Part 16) : 1986 Determination of brittleness by izod impact (second revision)
IS 1708 : (Part 17) : 1986 Determination of brittleness by Charpy impact (second revision)
IS 1708 : (Part 18) : 1986 Determination of torsional strength (second revision)
IS 2408 : 1963 Methods of static tests of timbers in structural sizes
IS 2455 : 1990 Method of sampling of model trees and logs for timber testing and their conversion (second revision)
IS 2753 : Methods for estimation of preservatives in treated timber and treating solutions
IS 2753 : (Part 1) : 1991 Determination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil (first revision)
IS 2753 : (Part 2) : 2014 Determination of copper in copper organic preservative salt (second revision)
IS 4907 : 2004 Method of testing timber connectors (first revision)
IS 8292 : 1992 Methods for evaluation of working quality of timber under different wood operations .Method of test (first revision)
IS 8720 : 1978 Methods of sampling of timber scantlings from depots and their conversion for testing
IS 8745 : 1994 Methods of presentation of data of physical and mechanical properties of timber (first revision)
IS 10420 : 1982 Method of determination of sound absorption coefficient of timber by standing wave method
IS 10754 : 1983 Method of determination of thermal conductivity of timber
IS 11215 : 1991 Methods for determination of moisture content of timber and timber products (first revision)
IS 13621 : 1993 Method of test for determination of dielectric constant of wood under microwave frequencies

4. Structural Timber Tests

IS 3629 : 1986 Specification for structural timber in building (first revision)
IS 4891 : 1988 Specification for preferred cut sizes of structural timber (first revision)
IS 4924 : Method of test for nail jointed timber trusses
IS 4924 : (Part 1) : 1968 Destructive test
IS 4924 : (Part 2) : 1968 Proof test

5. Logs

IS 3364 : (Part 3) : 1976 Method of measurement and evaluation of defects in timber
IS 3364 : (Part 1) : 1976 Logs (first revision)
IS 3364 : (Part 2) : 1976 Converted timber (first revision)
IS 4895 : 1985 Specification for teak logs (first revision)
IS 5246 : 2000 Specification for coniferous logs (first revision)
IS 7308 : 1999 Specification for non-coniferous logs (first revision)

6. Bamboo

IS 6874 : 2008 Method of tests for bamboos (first revision)
IS 8242 : 1976 Methods of tests for split bamboos
b. Reconstitu Products

1. Plywood

IS 303 : 1989 Specification for plywood for general purposes (third revision)
IS 710 : 2010 Specification for marine plywood (second revision)
IS 1328 : 1996 Specification for veneered decorative plywood (third revision)
IS 1734 : Methods of test for plywood
IS 1734 : (Part 1) : 1983 Determination of density and moisture content (second revision)
IS 1734 : (Part 2) : 1983 Determination of resistance of dry heat (second revision)
IS 1734 : (Part 3) : 1983 Determination of fire resistance (second revision)
IS 1734 : (Part 4) : 1983 Determination of glue shear strength (second revision)
IS 1734 : (Part 5) : 1983 Test for adhesion of plies (second revision)
IS 1734 : (Part 6) : 1983 Determination of water resistance (second revision)
IS 1734 : (Part 7) : 1983 Mycological test (second revision)
IS 1734 : (Part 8) : 1983 Determination of pH value (second revision)
IS 1734 : (Part 9) : 1983 Determination of tensile strength (second revision)
IS 1734 : (Part 10 : 1983 Determination of compressive strength (second revision)
IS 1734 : (Part 11) : 1983 Determination of static bending strength (second revision)
IS 1734 : (Part 12) : 1983 Determination of scarf joint strength (second revision)
IS 1734 : (Part 13) : 1983 Determination of panel shear strength (second revision)
IS 1734 : (Part 14) : 1983 Determination of plate shear strength (second revision)
IS 1734 : (Part 15) : 1983 Central loading of plate test (second revision)
IS 1734 : (Part 16) : 1983 Vibration of plywood plate test (second revision)
IS 1734 : (Part 17) : 1983 Long time loading test of plywood strips (second revision)
IS 1734 : (Part 18) : 1983 Impact resistance test on the surface of plywood (second revision)
IS 1734 : (Part 19) : 1983 Determination of nail and screw holding power (second revision)
IS 1734 : (Part 20) : 1983 Acidity and alkalinity resistance test (second revision)
IS 4990 : 2011 Specification for plywood for concrete shuttering work (third revision)
IS 5509 : 2000 Specification for fire retardant plywood (second revision)
IS 5539 : 1969 Specification for preservative treated plywood
IS 7316 : 1974 Specification for decorative plywood using plurality of veneers for decorative faces
IS 10701 : 2012 Specification for structural plywood (first revision)
IS 13957 : 1994 Specification for metal faced plywood
IS 15791 : 2007 Specification for museum plywood

2. Block boards, Particle Boards and Fibre Boards

IS 1658 : 2006 Specification for fibre hardboards (third revision)
IS 1659 : 2004 Specification for block boards (fourth revision)
IS 2380 : Methods of test for wood particle boards and boards from other Lignocellulosic materials
IS 2380 : (Part 1) : 1977 Preparation and conditioning of test specimens (first revision)
IS 2380 : (Part 2) : 1977 Accuracy of dimensions of boards (first revision)
IS 2380 : (Part 3) : 1977 Determination of moisture content and density (first revision)
IS 2380 : (Part 4) : 1977 Determination of static bending strength (first revision)
IS 2380 : (Part 5) : 1977 Determination of tensile strength perpendicular to surface (first revision)
IS 2380 : (Part 6) : 1977 Determination of tensile strength parallel to surface (first revision)
IS 2380 : (Part 7) : 1977 Determination of compression- perpendicular to plane of the board (first revision)
IS 2380 : (Part 8) : 1977 Compression parallel to surface test (first revision)
IS 2380 : (Part 9) : 1977 Determination of resistance to shear in plane of the board (first revision)
IS 2380 : (Part 10) : 1977 Falling hammer impact test (first revision)
IS 2380 : (Part 11) : 1977 Surface hardness (first revision)
IS 2380 : (Part 12) : 1977 Central loading of plate test (first revision)
IS 2380 : (Part 13) : 1977 Long time loading bending test (first revision)
IS 2380 : (Part 14) : 1977 Screw and nail withdrawal test (first revision)
IS 2380 : (Part 15) : 1977 Lateral nail resistance (first revision)
IS 2380 : (Part 16) : 1977 Determination of water absorption (first revision)
IS 2380 : (Part 17) : 1977 Determination of swelling in water (first revision)
IS 2380 : (Part 18) : 1977 Determination of mass and dimensional changes caused by moisture changes (first revision)
IS 2380 : (Part 19) : 1977 Durability cyclic test for interior use (first revision)
IS 2380 : (Part 20) : 1977 Accelerated weathering cyclic test for exterior use (first revision)
IS 2380 : (Part 21) : 1977 Planeness test under uniform moisture content (first revision)
IS 2380 : (Part 22) : 1981 Determination of surface glue ability test
IS 2380 : (Part 23) : 1981 Vibration test for particle boards
IS 3087 : 2005 Specification for particle boards of wood and other Lignocellulosic materials (medium density) for general purposes (second revision)
IS 3097 : 2006 Specification for veneered particle boards (second revision)
IS 3129 : 1985 Specification for low density particle boards (first revision)
IS 3308 : 1981 Specification for wood wool building slabs (first revision)
IS 3348 : 1965 Specification for fibre insulation boards
IS 3478 : 1966 Specification for high density wood particle boards
IS 12406 : 2003 Specification for medium density fibreboards for general purposes (first revision)
IS 12823 : 2015 Specification for wood products. Prelaminated particle boards (first revision)
IS 13745 : 1993 Method for determination of formaldehyde content in particle board by extraction method called perforator method
IS 14276 : 1995 Specification for cement bonded particle boards
IS 14587 : 1998 Specification for Prelaminated medium density fibre board
IS 15786 : 2008 Specification for Prelaminated cement bonded particle boards

3. Wood-Based Laminates and Lumber

IS 3513 (Part 3) : 1989 Specification for resin treated compressed wood laminates (compregs): Part 3 For general purposes (first revision)
IS 3513 (Part 4) : Specification for high and medium
IS 1966 : density wood laminates (compregs): Part 4 Sampling and tests
IS 7638 : 1999 Methods of sampling for wood/ Lignocellulosic based panel products (second revision)
IS 9307: Methods of tests for wood-based structural sandwich construction
IS 9307: (Part 1) : 1979 Flexure test
IS 9307: (Part 2) : 1979 Edgewise compression test
IS 9307: (Part 3) : 1979 Flatwise compression test
IS 9307: (Part 4) : 1979 Shear test
IS 9307: (Part 5) : 1979 Flatwise tension test
IS 9307: (Part 6) : 1979 Flexure creep test
IS 9307: (Part 7) : 1979 Cantilever vibration test
IS 9307: (Part 8) : 1979 Weathering test
IS 14315 : 1995 Specification for commercial veneers
IS 14616 : 1999 Specification for laminated veneer lumber
IS 16171 : 2014 Specification for veneer laminated lumber

4. Bamboo and Coir Board Products

IS 13958 : 1994 Specification for bamboo mat board for general purposes
IS 14588 : 1999 Specification for bamboo mat veneer composite for general purposes
IS 14842 : 2000 Specification for coir veneer board for general purposes
IS 15476 : 2004 Specification for bamboo mat corrugated sheets
IS 15491 : 2004 Specification for medium density coir boards for general purposes
IS 15877 : 2010 Specification for coir faced block boards
IS 15878 : 2010 Specification for coir hardboard for general purposes
IS 15972 : 2012 Specification for bamboo-jute corrugated and semi-corrugated sheets

5. Adhesives

IS 848 : 2006 Specification for synthetic resin adhesives for plywood (phenolic and amino plastic) (second revision)
IS 851 : 1978 Specification for synthetic resin adhesives for construction work (non- structural) in wood (first revision)
IS 852 : 1994 Specification for animal glue for general wood-working purposes (second revision)
IS 1508 : 1972 Specification for extenders for use in synthetic resin adhesives (urea- formaldehyde) for plywood (first revision)
IS 4835 : 1979 Specification for polyvinyl acetate dispersion-based adhesives for wood (first revision)
IS 9188 : 1979 Performance requirements for adhesive for structural laminated wood products for use under exterior exposure condition

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close


Comment:

Name:

Email:

Civil N Construction Blog



Relevant Topics

Tests for stones

Tests For Limestone

Tests Of Mortar

Specifications For Water (IS 456)

Determine Flexure Strength Of Concrete

Procedure For Test Of Silt Content In Sand

Determination Of Dry Density Of Soil Core Cutter Method

Procedure For Determination Of Aggregate Crushing Value

Procedure For Slump Test For Concrete

Determination Of Water Absorption Coarse Aggregate Format

Initial And Final Setting Test Of Cement Format

Concrete Quantite Register Grade Wise Summary Format

Procedure For Determination Of Water Content In Soil

Procedure For Determination Of Elongation Index Of Coarse Aggregate

Aggregate Crushing Value Test Format

Water Test Report Register Format

Testing Of Cement Testing Of Cement Field Test

Procedure For Sieve Analysis Of Fine Aggregates

Compressive Strength Test Of Bricks Format

Efflorescence Status Of Bricks Format

Procedure For Determination Of Flakiness Index Of Coarse Aggregate

Sieve Analysis For Coarse Aggregate Format

Procedure For Determination Standard Consistency Of Cement

Method Of Sampling Of Cement

Verification Of Compression Testing Machine Oil Leakage

Rolling Margin Register Format

Determination Of Specific Geavity Fine Aggregate Format

Concrete Quantity Register Pouring Details Format

Procedure For Sieve Analysis Of Coarse Aggregates

Verification Of Cube Moulds

Dimension Test Of Bricks Format

Slump Ans Temp Register For Concrete Format

Procedure For Filling Cubes

Consistency Of Standared Cement Paste Format

Rolling Margin Register Total Quantity Format

Procedure For Determination Of Aggregate Impact Value

Determination Of Specific Gravity And Water Absorption Of Fine Aggregates

Procedure For Compressive Strength Testing For Concrete

Incoming Material Receiving Register Format

Determination Of Specific Gravity And Water Absorption Of Coarse Aggregate

Internal Qa And Qc Audit Observation Format

Verification Of Sieves

Verification Of Mechanical Weigh Balance

Determination Of Water Absorption Of Bricks

List Of Site Laboratory Equipment

Flakiness Index Of Coarse Aggregate Format

Determination Of Efflorescence Of Bricks

Determination Of Specific Gravity Coarse Aggregate Format

Procedure For Determination Fineness Of Cement

Concrete Cube Register Format

Concrete Quantity Register Month Wise Summary Format

Water Absorption Test Of Bricks Format

Moisture Correction Format

List Of Records To Be Maintained Qc Qa

Fineness Test Of Cement Format

Procedure For Determination Compressive Strength Test Of Cement

Aggregate Impact Value Test Format

Elongation Index Of Coarse Aggregate Format

Procedure For Determination Of Compressive Strength Of Bricks

Material Test Plan Civil Works

Soundness Test Of Cement Format

Procedure For Determination Setting Time Of Cement

Fineness Test Of Flyash Format

Field Dry Density Of Soil By Core Cutter Method Format

Bend And Reband Test Of Steel Format

Determination Of Water Absorption Fine Aggregate Format

Compressive Strength Test Of Cement Format

Sieve Analysis For Fine Aggregate Format

Verification Of Pan Balance

Calibration Plan

IS Codes for landscape developement and IS Codes for approaches to sustainability

IS Codes for steel and its alloys

IS Codes for stones

is-codes-for-structural-sections

IS Codes for threaded fasteners rivets and nails

IS Codes for timber bamboo and other lignocellulosic building materrials

IS Codes for waterproofing and damp proofing materials

IS Codes for building chemicals

IS Codes for building lime & products

IS Codes for clay & stabilized soil products

IS Codes for doors windows & ventilators

IS Codes for floor covering roofing & other finishes

IS Codes for glass & mortar

IS Codes for paints and allied products

IS Codes for polymers plastics & geosynthetics geotextiles

IS Codes gypsum based materials

IS Codes Safety and IS Codes For Demolition and Dismantling

IS Codes for Roofing

IS Codes for Steel Work

IS Codes for Finishing

IS Codes for Flooring

IS Codes for Stone Work

IS Codes for Wood Work

IS Codes for Brick Work

IS Codes for RCC Work

IS Codes for ConcreteWork

IS Codes for Mortar

IS Codes for composite matrix products

IS Codes for cement & concrete

IS Codes for builder's hardware

IS Codes for aluminium & other light metals & their alloys

Quality Control (QC), Quality Assurance (QA), Quality Control Utilizes Tools and techniques

Quality Assurance manual (QAM), Quality Assurance Plan (QAP)

Quality Audits, Quality Assurance Formulations

Quality Control Method Statement, Pre- Construction Stage, Construction Stage, Post- Construction Stage

Quality Control Plan, Quality Control System, Quality control of materials, Quality control of workers, Quality control of execution

IS Codes for air conditioning heating and mechanical ventilation

IS Codes for drainage and sanitation

IS Codes for electrical and allied installations

is codes for firefighting and life safety

IS Codes for lighting and natural ventilation

IS Codes for solid waste management and IS Codes for gas supply

is codes for thermal insulation materials

IS Codes for water supply

is codes for welding electrodes and wires

IS Codes for electrical wiring fittings and accessories

IS Codes for conductors & cables

IS Codes for sanitary appliances and water fittings

Sponsored

PD Consulting Engineers Pvt. Ltd. Transforming construction for a new generation "Cost, Quality & Project management"

QS & Cost management, Bill Checking / Audit, Technical Auditors, Valuation, Contract and Tendering, Project Management, Project Planning, Quality Control, Consulting Engineers, Structural Consultancy

Close